SKF 6017-2ZNR 深沟球轴承 85×130×22 mm斯凯孚 · 瑞典
深沟球轴承 · 主要尺寸 85×130×22 mm

SKF 6017-2ZNR 技术参数
| 尺寸 | |
| 孔径 | 85 mm |
|---|---|
| 外径 | 130 mm |
| 宽度 | 22 mm |
| 性能 | |
| 基本额定动荷 | 52 kN |
| 基本额定静负荷 | 43 kN |
| 参考转速 | 11000 r/min |
| 极限转速 | 5300 r/min |
| SKF 性能等级 | SKF Explorer |
| 属性 | |
| 注油槽 | 不带 |
| 列数 | 1 |
| 定位特征,轴承外圈 | 止动环(已安装) |
| 孔类型 | 圆柱孔 |
| 保持架 | 冲压钢 |
| 配对布置 | 无 |
| 径向游隙 | CN |
| 材料,轴承 | 轴承钢 |
| 涂层 | 不带 |
| 密封 | 两侧带防尘盖 |
| 密封类型 | 非接触 |
| 润滑剂 | 润滑脂 |
| 补充润滑功能 | 不带 |
| 新产品的指示性碳足迹 | 3.2 kg CO<sub>2</sub>e |
产品说明
- 卡环有助于在轴承座内轴向定位
- 嵌入式密封可延长轴承的使用寿命
- 单列深沟球轴承的典型优势
Single row deep groove ball bearing, with snap ring groove and seals or shields on one or both sides, are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The snap ring, fitted in an annular groove in the outer ring, facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
同尺寸其他型号
以下型号与 SKF 6017-2ZNR 的主要尺寸相同(d 85 × D 130 × B 22 mm),可用于同尺寸替代选型。